Topics

1

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]Not 100% Complete?

March 27, 2015, 07:36:31 PM

Hey gang,
I'm looking through my collection to try and find where this small gray/grey wing part goes and I notice that my Armada Starscream ( http://www.shmax.com/product_details/13433/armada_starscream ) says it's only 85.71% complete even though I have all of the parts. Why would this be?

2

General Transformers Discussion / Display/Storage and Spring loaded features.

March 22, 2015, 11:44:29 AM

Hey everyone,
I was messing with my collection earlier today and noticed, in regards to spring loaded features and weapons and such, that some of them I have "cocked" and ready to fire (Spring compressed) and others I just had the projectiles in the barrels loosely (springs uncompressed). I'd like to hear some others thoughts on how they keep their springs. Is it better for them to be kept in a compressed or uncompressed state? Which way is best for the lifespan and longevity of the toy/part? I want to say it's best to keep them uncompressed but I'm just not sure.  Can anyone share their thoughts or knowledge on this?

3

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED] Viewing Collection question(s)

June 18, 2014, 07:49:42 PM

Hey guys,
It's been a minute since I've really looked at the site but I'm liking it. I was viewing my collection and selected Asia to see just my Asian toys and there are quite a few items that are from the U.S. still being listed.

http://www.shmax.com/view_collection/2549?q%5Bfilters%5D%5Bcountry%5D=57&q%5Bfilters%5D%5Btoyline%5D=3533

Is this a bug or do I just not properly understand how this is supposed to work?

4

Feature Requests/Announcements / Forum Thread Update Email

September 07, 2013, 02:18:08 PM

 I'm on a few sites that will send you an email when a thread you participate in or watch. I know we're asking for the rating thing now and I'm in no hurry I just wanted to put it out here while I was thinking of it.

Thanks

5

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]View Collection Issue

August 09, 2013, 08:02:42 PM

I have it sorted by added to collection newest - details. It doesn't show all of kreo predaking parts. Not a big deal but I just figured id pass it on. I checked and if you're just browsing the data base it shows them but not in the view collection section.

http://www.shmax.com/view_collection/1/2549

6

General Transformers Discussion / Question On Hasbro MP Seekers.

August 01, 2013, 06:12:38 PM

I keep reading about a seeker remold. Can someone fill me in on this? I'm on the fence with Acid Storm. I have Thundercracker and I can still take him back and get AS. I'm into collecting molds so if it's significantly different I may trade up.

I got TC because I heard he was smaller than the Starscream/Skywarp mold. I haven't opened him yet, can anyone elaborate on this for me? Maybe a little MP Seeker mold history lesson or something?

Thanks.

7

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]A couple of bugs

July 04, 2013, 01:12:27 PM

Some of my links in the upper right hand menu (the one with name and avatar) are not working in Chrome. Working fine in firefox. Specifically edit collection through wish list. The others are working for me.

Also when I use the blue expandable menu, the black Remove is not aligned with the under light blue one.

8

Transformers News / TFSource Generations Springer and Blitzwing

June 24, 2013, 01:53:16 PM

Just to share, I received an email today telling me that TFSource now has them in stock and they will start shipping first ordered first served in the next 24-48 hours.

I'm pretty sure I got in on the first round of pre-orders, I know that it said Sold Out for a little while about a week or two after I ordered then, pre-order was made available again. So, I'm hoping to have these guys in the next week or so.

Perfect timing because we just bough a house a few weeks ago and I just started unpacking my toys yesterday

9

Help Us Build the Database / Does this mean that these have been released?

April 17, 2013, 07:25:36 PM

It appears robot kingdom has the generations voyager wave 3 in stock.

http://robotkingdom.com/services/eshop/main.php?action=details&CatType=Category&II=TF2012VOY003&lang=us&CatID=100

10

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]Signature issues.

April 17, 2013, 01:53:49 PM

Hey guys,
On the details page of my dynamic sig, it only shows my Japanese figures and only 1 of them.
;-)

11

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]Wish list issues.

April 14, 2013, 11:28:36 AM

On the wish list, when I click on the nav links on the left hand size it used to show only that category. Nothing happens now :-(  It's been like that for a while I though some one mentioned it before. Maybe even me but I just wanted to put it out there just in case you were unaware of it. 

12

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]Upcoming Releases

April 10, 2013, 09:37:53 AM

On the home page, in the Upcoming section there are 2 products listed with dates. One April 1 2013 and another for I think November of 2012. Is that a bug or are there new releases of those coming out, say in Canada or UK or somewhere else that would keep them listed as Upcoming?



Kre-O > Transformers > Building Sets
A4642 Ultimate Kreon Collection
Apr 1, 2013





Kre-O > Transformers > Exclusive
A1265 Construction Devastator
Nov 4, 2012

13

Feature Requests/Announcements / Adding Preorders

April 01, 2013, 03:43:58 PM

I notice I can no longer add a product that has no release date. Case in point I just pre ordered Gen Springer and Blitzwing. I never tried adding a pre order before so maybe this is normal. I usually add a product when I order it and make a memo in the notes as to the date then I update the bought date on the date I receive them.  Did we used to be able to add pre orders? Can we start adding pre-orders. Or is it that we have to at least wait until there is an official date ?

Thanks

14

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]View count in collection sorting.

April 01, 2013, 09:21:16 AM

I was viewing my collection my purchase date (newest) but when I went to change #displayed from 20 and it gave me this error


Home
          
     We can't seem to find this page. Tell you what, we'll hunt around for it some more later, but for now, please check your number and dial again.

15

Bugs? On www.shmax.com? Ha ha, you kill me... / [RESOLVED]Not really a bug, just noticed

March 24, 2013, 11:59:32 AM

.... That when I first come to the forum it marks things with the New tag. I read the New posts, the new goes away. Now I just discovered this but I went to Help us...... And accidentally navigated away before I could read the new post in the actual thread. I go back to forums home and Help us.... no longer has New even though there are New threads to be read.

I think I know how it happens and personally feel it's not really worth any effort to fix. I just figured it should get documented so if you ever get so bored you want to fix it you know it's there.

Once again, I know it is super trivial but by all technical definition it's a bug. IDK this is just FYI ;-)

16

Feature Requests/Announcements / Advanced Wishlist.

March 20, 2013, 03:27:18 PM

How difficult would it be to be able to add molds to the wishlist?

http://www.shmax.com/database/12438?part_filter=7&r=1&browse=2

Say if this mold could be added to the wishlist somehow and by doing so would add all the known products with that mold to the wishlist. And removing a mold from the wishlist would do the same to the products.

It's just a thought. My collecting is driven primarily by getting new molds so having a wishlist based on molds would be awesome. I've probably got 15-20 figures on my wishlist because of the mold. CHUG Ratchet & Ironhide is a good example. Once I get either of them they are both going off of the wish list. It'd be cool to be able to just remove the mold from the wishlist with one click.

Not a big deal. I just figured I'd ask. ;-)

17

Feature Requests/Announcements / [RESOLVED]Smll Bug. or "When will Antron learn to type?"

March 16, 2013, 07:45:55 AM

I was viewing the DB (TF -> US) by release date last night and notice some DOTM products, with release dates, are being sorted into the Unreleased sections. I'm pretty sure it was only DOTM figures that found their way into the sort.

18

Help Us Build the Database / Browsing by mold.

March 12, 2013, 07:26:38 PM

I was browsing by mold and have a question.

Why is this

http://www.shmax.com/product_details/6772/battle_blades_optimus_prime

and this

http://www.shmax.com/product_details/8499/optimus_prime_and_comettor_bonus_value_pack

both listed here

http://www.shmax.com/database/10320?browse=2

I have them both and they are 2 very different toys. The 2010 is almost leader sized and the DOTM one is the same size as the other DOTM voyagers. Is this an error or are they tied together by a common part?

19

Transformers News / New TRU Canada Hasbro SKUs! or, "Guess who's going to be out of about $300!"

March 08, 2013, 10:36:10 AM

TRU in Canada have prices for MP Soundwave. Generations Metroplex and more.
I found it here.

[url] http://www.seibertron.com/transformers/news/retail-masterpiece-and-metroplex-prices-revealed-in-canadian-tru-skus/26840[ /url][/url]

20

Feature Requests/Announcements / Photo Albums?

March 07, 2013, 02:01:25 PM

What's the probability of getting personal user photo albums?  So we could upload pics that aren't for the db but still share.